Manuals / Brands / Communications / Conference Phone / Uniden / Communications / Conference Phone

Uniden 1380, 1380BK If You Did Not Program Your Local Area Code

1 44

Download 44 pages, 1.42 Mb

25

3. If you are at on-hook and PICKUP or ADJ displays, you can adjust the phone

number format by pressing the DIAL button. If the phone is off-hook and

ADJUST shows in the display, you can adjust the phone number format by

pressing the DIAL button. For example, sometimes a 7-digit local number

cannot be dialed because it requires a 10-digit or 11-digit format. Press the

DIAL button repeatedly to scroll through the 7, 10, and 11-digit numbers.

7-digits: 7-digit telephone number (i.e. 555-5555)

10-digits: 3-digit area code + 7-digit telephone number (i.e. 425-555-5555)

11-digits: long distance code 1 + 3-digit area code + 7-digit telephone

number (i.e. 1-425-555-5555)

4. To dial the displayed number, and the phone is on-hook, pick up the handset

or press the SPEAKER button before the timer reaches 0. If the phone is off-

hook, wait until the time reaches 0. The screen displays NOW DIALING and

the number is dialed.

If You Did Not Program Your Local Area Code

1. Use the SKIP or REPEAT buttons to display the number you want to dial. You

will only see 10-digit numbers (i.e. 234- 555-1234).

2. See Steps 2 through 4 in the previous section to complete the dialback

process.

Contents

Main Important Information Interference Information Telephone Network Information Page Page Table of Contents Telephone Jack Requirements Introduction Before You Begin Parts Checklist Page Base Layout Installing the Phone Desktop Installation Wall Mounting the Phone Important Instructions for Moving the Answerer: Answering System Setup Recording the Outgoing Announcement Reviewing the Announcement Telephone Operation Using the Speakerphone Speakerphone Location Speakerphone Use Receiving a Phone Call Placing a Phone Call Switching between Speaker and Handset Temporary Tone Dialing Flash Redial Mute Telephone Set Up Setting the Rings to Answer Toll Saver Setting the Incoming Message or Memo Length Setting the Recording Quality Setting the Security Code Setting the Display Contrast Setting Your Local Area Code Setting the Dialing Mode Setting Day of Week Setting the Time and Date Hour Minutes AM/PM Month Setting the Language Message Volume Ringer Volume Page Caller ID Features Summary Screen Caller ID with Call Waiting Receiving and Storing Calls Reviewing Call Records Deleting CID Records Dialing Back If You Programmed Your Local Area Code If You Did Not Program Your Local Area Code Memory Storing a Number in Memory Storing a Redial Number to Memory Erasing a Stored Number Copying Caller ID Memories to User Memory Page Reviewing Stored Numbers Chain Dialing from Memory Answering System Operation Call Answering Auto Disconnect Playing Messages Erase Messages Leaving a Memo Memory Full Remote Access Remote Access Commands Message Indicators Troubleshooting Guide Page General Product Care Causes of Poor Reception Warranty Page Index P R S T OR