Uniden 200 manual To Turn On or Off the PIN

HINT

To move to a menu, use either the ▲ (up) or ▼ (down) key.

HINT

To exit menu mode, press end or clear.

▼ PIN Calling Menu To change the PIN:

1)To go to the security menu from

standby, press menu.

2)Press ▼ three times.

3)Press menu.

4)Press ▼.

5)Press menu.

6)Press menu.

7)Enter your password. The factory pre-set password is 0123.

8)Enter the new PIN. The factory

pre-set PIN is 0000.

9)Press menu again.

In two seconds, the display returns to standby.

To Turn On or Off the PIN:

1)Follow steps 1 through 4 above.

2)Press ▼.

3)Press menu.

4)Use the ▼ or ▲ keys to choose between on or off.

5)Press menu again.

In two seconds, the display returns to standby.

26