Uniden 200 manual Receiving a Call, Making a Call, L L I N G, Absent Call Counter, Direct Dialing

SPEED

DIAL

Press mem, the two-digit memory location number (01-50)

and send.

Or, press mem, the one-digit number for 1 through 9, and send.

SUPER

SPEED

DIAL

From the standby display, press and hold the one-digit number (only for locations

1through 8).

Caution: location 9 is for emergency dialing only.

CALLINGMINICEL YOURWITH

RECEIVING A CALL

1) When someone calls your MiniCel, the LCD backlight flashes,

the alert sounds (see page 13) or vibrates (see page 18) and INCOMING CALL appears.

2)If the "any key" feature (page 19) is active, press any key other than ▲ or ▼.

If you have disabled the "any key" feature, press send.

3)The backlight stops flashing

and the icon appears in the display.

4) When you finish your call, press end.

▼Absent Call Counter

When you don't answer an incoming call, the display shows the number of unanswered call(s). Press any key to erase the message.

MAKING A CALL

▼ Direct Dialing

1)Enter the phone number on

the keypad. To erase a digit, press clear and reenter the correct number. To erase all the digits, press and hold clear.

2) Press send.

The icon shows in the display while a call is in progress. If the "current call timer" feature is on, the counter starts (see page 27).

C A L L I N G

7