Uniden 2315+2 quick start System Reset, De-register the Handset, Replacing the Base Setting

UP409ZH (WDECT2315-2) OM 12/22/05 3:27 PM Page 19

System Reset

De-register the Handset

1)	Enter the System Reset menu, and then the Deregister
							Which Handset?
	HS submenu (see “Entering the Menu” on page 13).
2)	Press	/vol/		or	/vol/	to select the handset	Handset	#1
	ID to be de-registered from the list, and then press						Handset	#2
			. Deregister HS? appears.
3)	Press	/vol/		or	/vol/	to select Yes.
							Deregister	HS?
4)	Press			. You will hear a confirmation tone.
	When de-registration is complete, Deregistration						Yes
	Complete appears.						No

5)After de-registering the handset, move to “Replacing the Base Setting” below.

Replacing the Base Setting

1)	Enter the System Reset menu, and then the Replacing
		Replace base?
	Base submenu (see “Entering the Menu” on page 13).
	Replace base? appears.	Yes
2)	Press /vol/ or /vol/ to select Yes.	No

3)Press . You will hear a confirmation tone. The base information will be deleted.

When replacing the base is complete, Place handset on main base to register appears, register the handset to the new base (see page 44).

Make sure to perform the Replacing Base after de-register the handset.

[ 19 ]