UP409ZH
This is an example, if you have handset #1 and #2.
Room Monitor
Using Room Monitor
1)Enter the Room Monitor menu (see “Entering the Menu” on page 13).
To Room Monitor appears.
2)Select the handset you want to monitor by using
/vol/ 
or 
/vol/ 
.
3)Press 
.
RoomMonitor appears, and you hear sounds in the room where the handset is installed.
4)To finish the Room Monitor, press 
or return the handset to the cradle.
To Room Monitor 
Handset #2
RoomMonitor 
Handset #2
Handset Setup
Programming your Voice Mail Access Number
1)Enter the Handset Setup menu, and then the Edit Voice Mail submenu (see “Entering the Menu” on page 13). Edit V_mail No. appears.
Edit V_mail No. 1234567890
[ 14 ]
2)Enter your personal access number using the number keypad
, 
, 
/del, or 
redial/pause (up to 20 digits).
3)Press 
. You will hear a confirmation tone.
To delete the current Voice Mail Access Number, delete all numbers in step 2
using 
/del and 
.
