UP409ZH
Call Transfer Feature
1)During a call, press 
/transfer/int’com.
2)Select a handset to transfer the call within 10 seconds. (Refer to step 2 in the intercom section on page 43).
The call will automatically be placed on hold, and an intercom tone sounds.
Hold,to transfer
Handset #2
Handset #3
For model number verification, visit our website www.uniden.com.au
or www.uniden.co.nz
[ 44 ]
To cancel the transfer, press 
or 
speaker on the initiating handset.
3)On the receiving handset, to answer the page, press 
or 
/transfer/int’com. If you turn AutoTalk on, pick up the handset from the cradle. If
Anykey Answer is On, press any number key, 
, or 
. The intercom mode is activated, but the caller is still on hold.
4)To transfer the call, press 
on the initiating handset, and press 
on the receiving handset.
REPLACING THE BASE
If the base unit is replaced with a different base from this same series of cordless models, you must clear handset (s) and base identification numbers. To do this, select “System Reset” from handsets display menu option list (see page 19 for guidance).
