4 | Press the ¥or | » key to | Store Name | ||||
| select “Edit Memory”, | ||||||
| UNIDEN CORP |
|
| ||||
|
|
| |||||
| then press select/ch . |
|
|
|
|
| |
| The following screen appears. |
|
|
|
|
| |
| The cursor flashes indicating that the display is ready for the | ||||||
| name to be edited. When a name has not been stored, the | ||||||
| cursor appears at the beginning of the second line. | ||||||
5 | Press ¥, » , | #/ 1 , */tone/0 , or del to edit the | |||||
| name. (See page 24.) |
|
|
|
|
| |
| To edit only the phone number, skip this step. | ||||||
6 | Press select/ch . |
| Store Number | ||||
| The following screen appears. | 817858330 |
| ||||
|
| ||||||
The cursor flashes indicating
that the display is ready for the number to be edited.
7 Use the dial keypad, redial/p , or del key to edit the phone number.
The phone number cannot exceed 20 digits. (See page 24.) When the phone number will not be edited, skip this step.
8 Press select/ch .
The handset beeps and displays | Memory01 Stored | |
the confirmation screen. The | ||
| ||
memory storage is complete. |
|
For example, if you store a name and number into memory location number 01, the display shows “Memory01 stored”.
After about 2 seconds,
“Memory Store” is
displayed.
Memory Store 01 UNIDEN CORP 02 JOHN DOE
9 Press mem to return to standby mode.
Display a Programmed Number
Use the #/ 1 and */tone/0 key to toggle between the names display and the numbers display.
Program name
Memory Store 01 UNIDEN CORP 02 JOHN DOE
1
1
Program number
Memory Store
018178583300
025452930
•When the stored phone number has 14 or more digits, “ \” is
displayed next to the 12th digit.
Press #/ 1 to see the extra digits and */tone/0 to return.
Memory Store
2906 011813554329
07
1Memory Store
300000
1
