With the base, After 2 seconds the display

After 2 seconds the display		Memory Store
returns to the
	02
“Memory Store” screen.
	03	MOM AND DAD

You may select another number to delete (return to step 4).

Press mem to return to standby.

With the base

Press memory .

The status LED blinks.

2 Press memory again.

3 Enter the memory location number (0-9)

of the number you wish to delete. The

status LED status LED goes out.

A confirmation beep indicates the number has been erased.

Page 34

Image 34

Uniden 8985 manual With the base, After 2 seconds the display, Returns to, Memory Store screen

Contents

Page Features Introduction Controls and functions 310 50 51 52 Contents Base unit Next, choose the best location to set up the base unitRead this first Handset Checking the package contents Setting up the base unit Choose the best location If you want to install the base unit on the wall, see Connect the base unit Contact your telephone company for Assistance Choose the dialing modeIf your dialing system is Set the switch to Tone Pulse Standard wall plate mounting Mounting the base unit on a wallIs firmly seated Direct wall plate mounting Preparing the battery pack Total00 Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solvents Auto TalkOff Cidcw On Area Code Setting the Caller ID optionsPress ¥or »to move the cursor to the item that is to be set Press 3 to select Area Code Entering your area codeBeep sounds and the displayed area code is entered From the base Making a callFrom the handset Handset on the base Phone rings. The status LED on the base flashes Receiving a callPress speaker to finish the call When phone is ringing When speaking with the baseWhen speaking with the handset Mute Ringer a Low Adjusting the ringer and earpiece volumeRinger a High Ringer B High Last three phone numbers entered can be quickly redialed Redialing a callOn-hook redialing Redial2 Press talk Talk appears flashing on the display. Talk Off-hook redialingTalk High Using the speaker phone Intercom from the handset to base To transfer from the handset to the base Transferring a callTo transfer from the base to the handset Press and hold mem until Memory Store is displayed Storing phone numbers and namesOn the handeset Memory Store 01 Uniden Corp 02 John DOE 817555330 Store NumberStore Number is Memory03 Stored On the base Press mem Handset displays your programmed memory locations Making calls with memory dialingOn-hook dialing Memory16 Talk Talk High Off-hook dialingTalk 035 See Editing a stored name and/or phone numberEdit Memory01 Delete Memory01 Go Back 817858330 Store NameSelect Edit Memory Memory01 Stored Edit Memory02 Erasing a stored name and phone numberWith the handset Delete Memory02 Returns to With the baseAfter 2 seconds the display Memory Store screen When speaking on the base When speaking on the handsetWay conferencing Caller ID service 1230PM When the telephone rings11 1230PM 813-8 3300 Press »to display the latest caller ID message Viewing the Caller ID Message listNew Total02 17 1230PM Deleting information from the Caller ID list When the pointer is at YesWhen the pointer is at No Deleting a Caller ID message Or »to select Deleting all Caller ID name/numbersDelete All ? Display returns to the summary screen Calling a party from the Caller ID list Using the Caller ID list8178583300 Storing Caller ID messages in Memory dialing Select Location Using Caller ID with call waiting service Talk Uniden Corp Integrated Integrated answering device Setting the clock » Recording your personal greeting Setting your greeting» Preset Message » Choosing between two greetings Selecting the message record time Switch to» Announce only feature Selecting a PIN code Setting ring time switch Base LED shows the number of total messages on Using your answering systemPlaying your message Waiting for you. The Exai 8955 is designed to play your new Repeating a message Skipping a message » Deleting individual message Deleting a messageVoice memo » Deleting all messages Recording a conversation Remote access away from home Command Function Remote room monitor Additional Information Changing the digital security code Headset installation Installing the beltclipTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handling To help eliminate TroubleshootingSymptom Suggestion Background noise Symptom Suggestion Base unit SpecificationsGeneral Handset K, L Digital security code Earpiece volume Headset installationIndex W, X, Y, Z

After 2 seconds the display

Memory Store￿

returns to the

“Memory Store” screen.

With the base

Memory Store