6.Press SCAN on both scanners. The data transfer begins from the Master Unit to the Slave Unit.
During the data transfer, both scanners show the following displays.
When the data transfer is complete, COMPLETE displays.
CLONE
==>
MASTER UNIT
CLONE
==<
SLAVE UNIT
CLONE
COMPLETE MASTER UNIT
If the data transfer is not successful, the following error message will appear.
CLONE
ERROR MASTER UNIT
Note: To clear ERROR, press (decimal key).
.
To exit the Clone mode, press MENU/BACK repeatedly.
Note: Once you have completed the cloning of the scanners, reset the scanners by turning the scanners OFF and then ON again. This is particularly important to know if you wish to Clone another scanner right away.
83