Uniden BT229 Call Waiting, Voice-activated dialing, All voice commands must already be programmed

Call Waiting

To use this feature, you must subscribe to Call Waiting through your service provider, and your phone must support the hands-free profile.

►To put your current call on hold and switch to a waiting call, press and hold Up until you hear 3 beeps (about 4 seconds). When you release the button, you’ll be connected to the waiting call. (Press and hold Up again to switch back to the original call.)

►To hang up your current call and switch to a waiting call: press and hold Down for about 4 seconds. Wait until you hear 3 beeps, then release the button.

Voice-activated dialing

To use this feature, your phone must support voice dialing, and

all voice commands must already be programmed.

►To activate voice dialing, make sure your phone is in standby. Then, press and hold MFB until you hear a beep (about 2 seconds).

►Use your pre-programmed voice commands as you would with your phone. (For best results, try recording your voice tags through your headset. )