Uniden BTS200 manual Battery Features, Install and Charge the Battery, Remove the Battery

Battery Features

Your BTS200 comes equipped with a rechargeable Lithium-Ion polymer battery. You can recharge the battery by connecting it to 120 VAC power through the AC adapter.

Install and Charge the Battery

See page 5 for details on installing and charging the battery (the same procedures as for initial turnup).

Remove the Battery

1.Press down on the battery latch to release the battery.

2.With the battery latch pressed down, press down and push out the opposite end of the battery to slide it out of the battery compartment.

Check the Battery Level

Press the battery indicator button while the AC adapter is not connected to your speaker (see page 8). The battery LEDs light according to how much power remains in the battery:

•• 3 LEDs = 100 - 70% remaining

•• 2 LEDs = 70 - 35% remaining

•• 1 LED = 35 - 15% remaining

18 - English