Tone Dialing Switch Over
If your telephone company uses pulse dialing, you can switch over to tone dialing after the call connects. This feature is useful when you need tone dialing to use any automated menu systems, such as automated banking, prescription refill lines, customer support menus, etc.
If your phone is set to pulse dialing mode, make your call normally. Once your call connects, press */tone on the handset or base. Any digits you enter from then on will
be sent as tone digits. When this particular call ends, the phone automatically returns to pulse dialing mode.
Privacy Mode
Privacy mode prevents interruption from other registered handsets or the base. This works only when the phone is in use. While on a call, press the OPTIONS soft key on the handset or the base. Use the joystick or the up/down key to select Call Privacy. Privacy Mode On and 
appear in the display. To exit Privacy Mode, use the same procedure. Privacy Mode Off appears.
Do Not Disturb (DND)
6CNM
2TKXCE[/QFG1P
126+105
The do not disturb feature (DND) allows you to mute the ringer of the base and any registered handsets at the same time. The phone must be in standby mode. Press and hold dnd on the base. You will hear a confirmation tone, and the dnd LED illuminates. To cancel the DND feature, press dnd again. You can also mute the ringer tone while the phone is ringing by pressing dnd on the base.
[ 4 7 ] Using Your Phone | w w w . u n i d e n . c o m |
