note 
•Use only the supplied
AD-0006 AC adapter. Do not use any other AC adapter.
•Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.
•Don't place the base in direct sunlight or subject it to high temperatures. The battery may not charge properly.
If your telephone outlet isn't modular, contact your telephone company.
Connect the base and charge the handset
1)Connect the AC adapter to the DC IN 9V jack.
Place the base close to the AC outlet to avoid long extension cords.
2) Connect the AC adapter to a continuous power supply (i.e., an outlet that is not controlled by a switch).
3) Close the handset and place it in the base with the handset facing forward.
4) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts.
5)Charge your handset at least 15 hours before plugging into the phone line.
6) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and to a telephone outlet.
Setting up the Phone
w w w . u n i d e n . c o m | Setting up the Phone [ 1 0 ] |
