Uniden CLX 465 owner manual Voice Mail Tone, Resetting the New Message LED for Base

If you have an access number already entered, the current number will appear in the display. To delete that number, press the DELETE soft key. If you need to have the phone wait before sending the next digits, press the PAUSE soft key. Press the center of the joystick or menu/select on the base when you finish.

A P appears in the display each time you press the PAUSE soft key; each pause inserts a two-second delay in the dialing sequence, and each pause counts as one digit.

Voice Mail Tone

Your telephone service provider should provide you with the specifics of your voice mail service upon your enrollment. If you are having trouble with your message waiting indicator on your phone not illuminating when you have waiting messages, you will need to contact your service provider and inquire as to which type of message signal (SDT or FSK) their service is using.

If your voice mail service uses a SDT message signal to alert you of a new voice mail message, you will need to turn on the Voice Mail Tone.

If your voice mail service uses a FSK message signal to alert you 8QKEG/CKN6QPG of new voice mail messages, you can turn the Voice Mail Tone off. 1P

To turn off Voice Mail Tone, go to Voice Mail Tone and select Off. 1HH



System Setup

Global

Voice Mail

Tone

Resetting the New Message LED for Base

5'.'%6

VMWI

If the LED remains on after you've retrieved your messages, you may need to reset the indicators. To reset the New Message LED, go to VMWI Reset and press the SELECT soft key or menu/select, you will hear a confirmation tone.

Reset

[ 4 9 ] Using Your Phone w w w . u n i d e n . c o m