If the selected speed dial number is already assigned, the Edit screen appears. You can select Edit to edit this entry, select Delete to erase this entry, or select Go Back to choose another speed dial number.
4)Enter a name according to the instructions below.
•The name can be up to 14 characters.
• | Use #/ and */tone/ | keys to move the cursor to the desired location. |
• | Use delete/channel ( | delete on the base) to delete characters as needed. |
• Press and hold delete/channel ( 
delete on the base) to delete all the characters.
• If no name is required, go to step 5.
Refer to the letters on the number keys to select the desired characters.
Each time you press a numeric key, the displayed character appears in the following order: Upper case letters first, lower case letters next and finally the number corresponding to the key.
If you make a mistake while entering a name
Use */tone/ 
or #/ 
to move the cursor to the incorrect character.
Press delete/channel ( 
delete on the base) to erase the wrong character. Then enter the correct character. To delete all characters, press and hold delete/channel
( 
delete on the base).
note
If the next character uses the same number key, you must press the #/ 
key to move the cursor over. Otherwise the next time you press the number key, it changes the character that was previously set.
U S I N G T H E S P E E D D I A L M E M O R Y
w w w . u n i d e n . c o m | U S I N G T H E S P E E D D I A L M E M O R Y [ 3 0 ] |
