Severe noise interference | Uniden CXAI 5198 specification

	Symptom	Suggestion

		• Keep the handset away from microwave ovens, computers, remote control toys, wireless
	Severe noise interference.	microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical
	Severe noise interference.	appliances.
		appliances.
		• Move the base to another location or turn off the source of interference.

		• The call was answered before the second ring.
	The Caller ID does not display.	• The call was placed through a switchboard.
		• Your Caller ID service may not be active; contact your local telephone service provider.

	The answering system does not	•Make sure the AC adapter is plugged into wall outlet.
	work.	•Make sure the answering system is turned on.

	The answering system does not	•Set the record time to either the one minute or four minute option.
	record any messages.	•The memory may be full. Delete some or all of the saved messages.

	Messages are incomplete.	•The incoming messages may be too long. Remind callers to leave a brief message.
	Messages are incomplete.	•The memory may be full. Delete some or all of the saved messages.


	After a power failure, the	• Record your personal outgoing message again. The default message should remain.
	outgoing message is deleted.
	outgoing message is deleted.

	No sound on the base unit	• Adjust the speaker volume on the base unit.
	speaker during call monitoring	• Adjust the speaker volume on the base unit.
	speaker during call monitoring	• Make sure the call screen feature is set to on.
	or message playback.	• Make sure the call screen feature is set to on.
	or message playback.

	Cannot access remote call-in	• Make sure you’re using the correct PIN code.
	features from another touch	• Make sure that the touch-tone phone you're using can transmit the tone for at least two
	tone phone.	seconds. If it cannot, you may have to use another phone to access your phone.

w w w . u n i d e n . c o m

T R O U B L E S H O O T I N G [ 5 6 ]

T R O U B L E S H O O T I N G

Image 57

Uniden CXAI 5198 owner manual Severe noise interference

Contents

Series Owners Manual Contents Welcome Features Talk and Standby Times Terminology With Handset Remote keys Controls & Functions Repeat/rewind P.44 Call id P.35 Play/stop P.44 Do the following steps Setting up the Phone Connect the base unit Install the rechargeable battery pack into the handset Connect the charger Standard wall plate mounting Mount the base unit on a wall if desired Direct wall mounting Installing the BeltclipTo attach the beltclip To remove the beltclip Optional Headset Installation Adjusting the LCD Contrast Base Setup Setting Day and Time Setting the Dial Mode Setting Caller ID on Call Waiting Cidcw Setting the Area Code Using the interface Handset Setup Selecting a Language Handset only Setting AutoTalk Checking Area Code selected from the Handset Power Failure Operation Using Your PhoneMaking and Receiving Calls Making a call From the handset Receiving a call From the handset From the base Hanging Up Redialing the last dialed number Placing a Call on Hold Call Waiting Adjusting the Ringer, and Earpiece and Speaker Volume Selecting the Handset Ring Tone and VolumeSetting the Base Ringer Volume Muting the Ringer Earpiece and Speaker VolumeDo Not Disturb DND Temporarily Muting the Ringer Tone Dialing Switch-over Mute Base MicrophoneTraveling Out of Range Selecting a Different Channel ConferencingJoining a Conference Call Intercom Making an IntercomMaking an Intercom Page While the Line is on Hold Press talk/flash or select/int’com Answering an Intercom Storing Names and Numbers in Speed Dial Memory Using the Speed Dial Memory If you make a mistake while entering a name Use delete/channel Number of times key is pressed Keys Storing Caller ID data in Speed Dial Memory Making Calls from Speed Dial Memory To cancel speed dialing Caller ID and Caller ID on Call Waiting Cidcw When the Telephone Rings Viewing the Caller ID Data Deleting Data from the Caller ID List Deleting a Caller ID DataDeleting all Caller ID names/numbers Making a Call from the Caller ID Data Volume or / / /select/volume Integrated Answering Device Features Setting Up the Answering Machine Setting the Record TimeSetting the Call Screen Setting the Ring Time Setting the Message Alert On or OffTurning the message alert tone off by pressing any key Turning the Answering System On/Off Setting a Security Code PIN Code Record a Personal Outgoing Message Setting Your Outgoing Message Greeting Using Your Answering System Announce only featureSelecting Your Greeting Repeating a message Playing your messages Deleting a message Skipping a message Voice memo messages are recorded as an incoming messages Voice memo Screening a call Recording a conversation Remote Operation Remote access with any touch-tone telephone Function Turn on the Answering System Remotely Remote Access with the Handset Function Power Failure Low battery alertBattery replacement and handling Cleaning the battery charging contacts General Information Battery InformationAC Adapter Information Frequency Symptom Suggestion Troubleshooting Severe noise interference Case Action Liquid Damage Precautions Installation Considerations Terminal Equipment Index Remote Operation Card Memory Location Memo Remote Operation Card E M O T E O P E R a T I O N C a R D Memo Memo Help for our Special Needs Customers At Uniden, well take care of you UCZZ010 06BA0