Uniden DECT1060-2 manual Tone Dialing Switch-Over, Registering a new handset, On your base

5 Press or to display either Tone or

Pulse and press to confirm.

6 Press to exit and return to standby.

Tone Dialing Switch-Over

If you have set your phone to use Pulse dialing, you can switch temporarily to Tone dialing for the duration of a call:

1Press .

2Enter the number you want. Press and

hold , D will be displayed.

Any digits entered after the D will be dialed using tone dialing.

Registering a new handset

When you register a new handset to your base, you will be asked to enter the base PIN code.

The pre-set PIN code is 0000. If you wish you can change this code, see page 29.

Before registering, make sure the new handset is fully charged and that you have the base and handset in front of you. Also, make sure all handsets and the base are in standby.

On the handset you want to register:

1Press to access the main menu.

2Press or until Add.settings is

displayed and press .

3Press or to display Register and

press .

4Press or to select your base

number and press .

On your base:

5 Press and hold for approx. 3 seconds. You are now in ‘registration mode’.

[27]