Uniden DECT1060-2 manual Handset is not charging properly, Handset will not link up with the base

Handset is not charging properly

•Check that the charge light is on and that the handset is sitting correctly in the base or charger. Clean the charging contacts with a dry cloth.

•Are you using the power adaptor supplied with your phone?

Handset will not link up with the base

•Is the symbol flashing?− if so, move closer to the base as you are out of range.

•Is the handset registered to the base?− see page 27.

•Buzzing noise on my radio, TV, computer or hearing aid. Sometimes your phone may interfere with other electrical equipment if it is placed too close. We recommend you leave a distance of at least one foot to avoid this.

Cannot make a call

•Is the Call Barring set?− see page 25.

•Is the prefix dial set?− see page 24.

CALLER ID

Caller’s details are not displayed

•Have you subscribed to a CALLER ID service? If not, contact your local telephone service provider.

•The caller may have withheld their details.

•Let the phone ring a couple of times as there may be a delay in receiving the CALLER ID information.

TELEPHONE ANSWERING MACHINE (DECT1080/DECT1080-2 only)

Not answering calls

•Check that answering machine is turned on, see page 39.

[44]