Uniden DECT1560 Series manual Programming one-touch voice mail access

Programming one-touch voice mail access

You can program your voice mail access number to the Voice Mail key /Mute on each handset so you can get your messages at the touch of a button. Your voice mail service provider will supply you with the access number (this may be simply a phone number).

To edit the voice mail number, follow the steps below:

1)	Press Menu/Select.
) Move the cursor to select the Handset Setup menu and press .		㨫
	Menu/Select.

3)Move the cursor to select Edit Voice Mail and press Menu/Select.

4)Enter your personal access number (up to twenty digits). If you need to have the phone wait before sending the next digits, press Redial/Pause to

insert a two-second pause in the dialing sequence. For a longer pause, press Redial/Pause multiple times. A P appears in the display each time you press Redial/Pause and each pause counts as one digit.

5)Press Menu/Select when you are finished. You will hear a confirmation tone.

Resetting the voice message waiting indicator

When you receive a new voice mail message, the new message LED on the top of the handset flashes and appears in the handset display. In the event your message waiting light gets out of sync with your phone company’s voice messaging system, you can manually reset it back to the “No messages waiting” state.

1)Press and hold FIND on the base for five seconds.

Note: The handsets connected to the base will start to beep, however, keep pressing for five seconds.

) A beep sounds and the message alert tone is reset.

43

Using Special Features