Uniden DECT2015+2, DECT2015+1 manual Finding a Lost Handset, Adjusting the Audio Tone

Models: DECT2015+2 DECT2015+1

1 60
Download 60 pages 28.13 Kb
Page 37
Image 37

Adjusting the Audio Tone

If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on a call. Your phone gives you three audio tone options: low, natural and high; the default setting, Natural Tone, is recommended for hearing aid users. Audio tone adjustments only apply to the earpiece, not the speakerphone.

To adjust the audio tone:

1. While on a call, press Menu/Select.

. Move the cursor to select Audio Tone, and then press Menu/Select.

3.Move the cursor to select desired option (High Tone, Natural Tone, or Low Tone), and then press Menu/ Select. Selected option appears in the display for two seconds, and then the display returns to normal.

Finding a Lost Handset

To locate a misplaced handset, press find on the base when the phone is in standby. The handsets connected to the paging base will beep for one minute, and PAGING appears on the handset display. To cancel paging, press find again or any key on the found handset.

Note: Handsets that are not currently connected to this base will not be paged.

Adjusting the Ringer, Earpiece and Speaker Volume

37

DECT 2015+1 OM.indb 37

7/7/08 12:31:00 PM

Page 37
Image 37
Uniden DECT2015+2, DECT2015+1 manual Finding a Lost Handset, Adjusting the Audio Tone