Liquid Damage, Handset Base | Uniden DECT2015+1, DECT2015+2 guide

Liquid Damage

Moisture and liquid can damage your cordless phone.

• If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal.

• If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow the steps below. After following these steps, if your cordless telephone does not work, please call our Customer Service Hotline (see the back cover page).

		Handset	Base

	1.	Remove the battery cover and leave it off for	1. Disconnect the AC adapter from the base, cutting
		ventilation.	off electrical power.
Troubleshooting	. Disconnect the battery pack. Leave the battery		. Disconnect the telephone cord from the base.
Troubleshooting		cover off and the battery pack disconnected for at	3. Let dry for at least 3 days.
		cover off and the battery pack disconnected for at
		least 3 days.
		least 3 days.
	3.	Once the handset is completely dry, reconnect the
		battery pack and the battery cover.
	4.	Recharge the handset’s battery pack for 15 to 20
		hours before using.

IMPORTANT: You must unplug the telephone line while recharging the battery packs to avoid charge interruption.

CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please visit www.uniden.com.au for Australian models and www.uniden.co.nz for New Zealand models for customer support.

54

DECT 2015+1 OM.indb 54

7/7/08 12:31:13 PM

Image 54

Uniden DECT2015+1, DECT2015+2 manual Liquid Damage, Handset Base

Contents

DECT2015 DECT2015+1 DECT2015+2 Table of Contents Adjusting the Ringer, Earpiece Speaker Volume Using Your PhoneUsing Caller ID, Call Waiting, and Redial Lists Finding a Lost Handset Using Hold, Conference and Transfer Troubleshooting PrecautionsIndex Warranty Welcome Installing the Phone Choosing the Best Location Installing the Battery RED Black Connecting the AC adapter To the baseTo the charging cradle for multi-handset packs only Charging the Handset Connecting to the Phone Line TEL Line appears Testing the Connection NOW YOU are Ready to USE Your Phone Adding accessory handsets Registering accessory handsetsExpanding Your Phone Using Multiple Bases Registering the handset to another base Selecting the base Features Getting to Know Your New Phone Terminology Used in this Manual Manual Conventions Parts of the Handset New message LED Parts of the Base Charge LED Standby Using the InterfaceReading the Display During a call Using the Four-way Function Key Using the Handset Menu Entering Text from Your Handset Basic Setup Setting the TimeActivating Personal Ring Insert Activating the Key Touch ToneName Tag Setting Up the Phonebook Creating Phonebook Entries Finding a Phonebook Entry Editing an Existing Phonebook Entry Storing Caller ID or Redial Numbers in the Phonebook Deleting a Single Phonebook Entry Deleting all Phonebook Entries Copying Phonebook Entries to Another Handset Customizing Your Handsets Changing the Handset BannerSelecting a Ring Tone Activating AutoTalk Activating Any Key Answer Making Using Your PhoneFrom a cordless handset From a handset speakerphone Call Switching to the Handset Speakerphone During a Call Making a Call from the PhonebookChain dialing from the phonebook Using Caller ID, Call Waiting, and Redial Lists Using the Caller ID ListMaking a Call from a Caller ID Record For Australian Model Using Call WaitingDeleting Caller ID Numbers For New Zealand Model Redialing a Number Deleting a Redial Record Adjusting the Earpiece Volume Adjusting the Ringer, Earpiece and Speaker VolumeAdjusting the Ringer Volume Adjusting the Speaker Volume Adjusting the Audio Tone Finding a Lost Handset Using Hold, Conference and Transfer Placing a Call on HoldConferencing Transferring a Call Answering a transferred call Using the Intercom Using Special FeaturesPrivacy Mode Making an intercom Muting the Microphone Answering an intercom Using a Voice Mail Service Programming one-touch voice mail access Resetting the voice message waiting indicator Wall Mounting the Base Wall plate Removing the wall-mount bracket Wall plate To AC outlet Battery Information MaintenanceSpecifications Battery life Cleaning the charging contacts Power FailuresLow battery alert Battery replacement and handling Troubleshooting Common IssuesWhen you have this Try Problem Troubleshooting Weak or Hard to Hear Audio Noise or Static on the Line Resetting the Handset Installing a telephone line filter or DSL filter Resetting the Handset Without the Base Changing the Line Mode for Multiple Extensions Traveling Out of Range Liquid Damage Handset Base Precautions Rechargeable Nickel-cadmium Battery WarningImportant Safety Instructions Index Handset Redial Memo One Year Limited Warranty Uniden DECT2015, DECT2015+1 & DECT2015+2 Uniden Australia Pty Limited/Uniden New Zealand Limited