Information
Using the surface units.
Instructions Safety
LO OFF
MED
HI
How to Set
Push the knob in and turn in either direction to the setting you want.
At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set.
Installation Instructions Operating
Be sure you turn the control knob to
OFF when you finish cooking.
Indicator Lights
A HOT SURFACE indicator light will glow when any radiant element is turned on, and will remain on until the surface is cool enough to touch.
A surface unit ON indicator light will glow when any surface unit is on.
NOTE: The surface unit ON indicator light may glow between theHOT SURFACEsurface control settings of LO and OFF, but there is no power to the surface units.
Customer Service Troubleshooting Tips
SURFACE
COOKING
Never cook directly on the glass.
Always use cookware.
OFF CENTER
Always place the pan in the center of the surface unit you are cooking on.
14
About the radiant surface units…
The radiant cooktop features heating units beneath a smooth glass surface.
NOTE: A slight odor is normal when a new cooktop is used for the first time. It is caused by the heating of new parts and insulating materials and will disappear in a short time.
The surface unit will cycle on and off to maintain your selected control setting.
It is safe to place hot cookware from the oven or surface on the glass surface when the surface is cool.
Even after the surface units are turned off, the glass cooktop retains enough heat to continue cooking. To avoid
■Water stains (mineral deposits) are removable using the cleaning cream or full strength white vinegar.
■Use of window cleaner may leave an iridescent film on the cooktop. The cleaning cream will remove this discoloration.
■Don’t store heavy items above the cooktop. If they drop onto the cooktop, they can cause damage.
■Do not use the surface as a cutting board.