GE JBP77 Using the clock and timer, Safety, Customer Service, To Set the Clock, To Set the Timer

Using the clock and timer.

Safety

CLOCK

Make sure the clock is set to the correct time of day.

The clock must be set for the automatic oven timing functions to work properly. The time of day cannot be changed during a timed baking or self-cleaning cycle.

To Set the Clock:

	Press the CLOCK pad.
1
	Press the HOUR and MIN. pads.
2

Information Operating

TIMER

ON/OFF

The timer is a minute timer only.

The timer does not control oven operations. The maximum setting on the timer is 11 hours and 59 minutes.

To Set the Timer:

1 Press the TIMER ON/OFF pad.

2 Press the HOUR and MIN. pads until the amount of time you want shows in the display. The timer will start automatically within a few seconds of releasing the pad.

Instructions Installation

To Reset the Timer:

If the display is still showing the time remaining, you may change it by pressing the HOUR and MIN. pads until the time you want appears in the display.

If the remaining time is not in the display, recall the remaining time by pressing the TIMER ON/OFF pad and then pressing the HOUR and MIN. pads until the new time you want shows in the display.

To Cancel the Timer:

Press the TIMER ON/OFF pad once. To cancel the timer press the TIMER ON/OFF pad again and hold for 4 seconds.

Instructions Troubleshooting Tips

TIMER COOK

ON/OFF or TIME

ON/OFF

End of Cycle Tones

Clear the tones by pressing the pad of the function you are using.

If you would like to remove the signal that beeps every 6 seconds, press and hold the CLEAR/OFF pad for 10 seconds.

To return the signal, press and hold the CLEAR/OFF pad
for 10 seconds.	21

Customer Service