![](/images/new-backgrounds/1309490/30949049x1.webp)
Setting Up the Phonebook
Each handset has its own separate phonebook that holds up to seventy names and numbers. When a handset’s phonebook is full, the handset beeps and shows MEMORY FULL on the display. You cannot add any names and numbers in that handset’s phonebook until you delete some of the existing ones.
You can also use the phonebook entries to store a group of numbers (up to twenty digits) that you may need to enter once your call connects. This is referred to as chain dialing. (See Chain dialing from the phonebook on page 32.)
Creating Phonebook Entries
To store names and numbers in your phonebook, please follow these steps:
) With the phone in standby, press [ ] (on the left side of the
2) To create a new phonebook entry, press [Select/menu]. Select the CREATE NEW menu. EDIT NAME appears..
3) Enter the name for this entry (EDIT NAME).
Use the keypad to enter a name for this entry; the name can contain up to sixteen characters. (See Entering Text from Your Handset on page 21 for instructions on entering text.) If you do not want to enter a name for this entry, your phone will store this entry as <NO NAME>. Press [Select/menu] when you are finished.
4)Enter the number for this entry (EDIT NUMBER).
Once you have stored a name, EDIT NUMBER appears next. Use the number keypad to enter the phone number; the phone number can contain
up to twenty digits. If you need the phone to pause between digits when it’s dialing (for example, to enter an extension or an access code), press [/pause] to insert a
enough. Each pause counts as one digit. Press [Select/menu] when you are finished.
24
Setting Up the Phonebook