Uniden DECT3080 Expanding Your Phone, Adding accessory handsets, Registering accessory handsets

Expanding Your Phone

Adding accessory handsets

Your phone supports a total of six cordless handsets, including any that were supplied with your phone. You can now place a fully-featured cordless handset anywhere AC power is available to connect the charging cradle.

•Your phone is compatible with the following Uniden DECT6.0 accessory handsets: DCX200, DCX300 and DWX207. (Please visit our website at www.uniden.com for the most up-to-date list of compatible handsets.)

•For instructions on connecting the charging cradle, see page 7.

•If you purchase any accessory handsets separately, you must register the handsets to the base before you can use them. (Accessory handsets that come packaged with a base are already registered to that base.)

Registering accessory handsets

When charged, registered handsets display a handset ID number. .

2)	Place the handset in the base cradle for about thirty seconds. HANDSET
		VQ  TGIKUVGT 
3)	When the handset has registered to the base, the LCD will display	/CPWCN  HQT  J G NR 
Handsets that have not been registered display as shown.
To register a DCX300 accessory handset:
) Charge the handset for 15-20 hours.
	REGISTERING will appear in the LCD.	5GG  [QWT  1YP T U

REGISTRATION COMPLETE then show the handset ID number.

If the display shows REGISTRATION FAILED, repeat the process again. To register a DCX200 or DWX207 accessory handset:

) Charge the handset for 15-20 hours.

2)Disconnect the base AC adapter. Then press and hold [find] while you reconnect the adapter. Keep pressing [find] until the charge LED starts to blink.

3)On the handset, press and hold [#] until the handset beeps and displays HANDSET REGISTERING.

4)When the handset has registered to the base, the LCD will display REGISTRATION COMPLETE then show the handset ID number.

Installing the Phone

12