Uniden DSS3405 Compatible Bases Installing the Accessory Handset, Installing the Battery

Compatible Bases

This handset is compatible with Uniden's 2.4 GHz Digital Expandable phone system: the DSS3415, DSS3455 and DSS3435 series. Visit www.uniden.com.au (Australian model) or www.uniden.co.nz (New Zealand model) for the most up-to-date list of compatible bases.

Installing the Accessory Handset

Checking the Package Contents

Make sure your package contains the following items. If any items are missing or damaged, contact your place of purchase.

•Cordless Handset

•AC Adapter, model #AAD-600S Input: 240V AC 50 Hz Output: 9V DC 210 mA

•Belt Clip

•Charging Cradle

•Rechargeable NiMH Battery Pack, model #BT-909 Capacity: 600 mAh,3.6V

•Printed Material

Installing the Battery

Follow the steps below to install the rechargeable battery pack.

1. Using the finger indentation, press in on

the battery case cover and slide it down to remove it.

2. Plug the battery connector into the battery compartment jack. Be sure to match the red and black wires to the label near the jack.

3. Gently pull on the battery wires. If the

battery connector comes loose, try connecting it again.

4. Replace the battery case cover and slide it up until it clicks into place.

Note: Use only the Uniden BT-909 rechargeable battery pack supplied with your cordless telephone.

(2)