Nighthawk SILVER STRIKE BOWLING operation manual Dedicated Cabinets, Dedicated Contents

Dedicated Cabinets

Dedicated Contents

(1)Silver Strike Bowling Dedicated Cabinet

(1)Silver Strike Bowling Manual

(1)Monitor Manual

(1)4 Leg Levelers

(1)Security Bar

If any parts to your dedicated cabinet are missing/damaged please contact IT's Technical Support at 847-870-7027 x121.

The Cabinet

NOTE: Diagrams for the Nighthawk Chassis and the dedicated

I/O Board can be found on page 44.

Volume and Test Switches

Your cabinet comes equipped with a bank of buttons mounted inside the coin door. The Test button will enter you into the Operator Mode Menus where audits, adjustables, and system tests can be accessed. Refer to the Operator Menus section (page 21) of this manual for more information.

There are also two volume control buttons mounted inside the coin door. Press the button on the left to decrease volume, and press the button on the right to increase volume. You can also adjust volume in the Operator Menus (see page 25).

Monitor

Your Silver Strike Bowling cabinet comes equipped with a digital monitor set to SVGA. Silver Strike Bowling dedicated cabinets support high-res. monitors, offering superb graphics and brilliant colors.

Silver Strike Bowling supports low-res, mid-res., VGA and SVGA monitors. Make sure the I/O Board and monitor are set properly for best game play results.

Security Bar

Silver Strike Bowling comes with a heavy -duty security bar, to help you protect your cash box. Use a strong padlock (not included) to lock the security bar in place. The security bar should be found installed on the front of your cabinet.

Ticket Dispenser

Silver Strike Bowling supports Entropy 2000 Ticket Dispenser Continuous Type (TD963CR) and Deltronic Labs DL-1275 Continuous Type ticket dispensers. If you wish to connect a ticket dispenser to this game, you will have to make a cable with the proper connectors. These ticket dispensers mates with a Molex connector #03-09-1041 or #03-09-1042. The I/O board ticket connector J201 mates with a Molex connector #22-01-2047 or #22-01- 3047. Simply connect pins 1 through 4 on one end directly to pins 1 through 4 on the other end. Consult with your ticket dispenser's manual to verify installation procedures. (See the Ticket Dispener section in the Operator Menus starting on page 36.)

Silver Strike Bowling™ Version 08/04 Page 18

© Copyright 2004 Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.

All other marks are the properties of their respective owners. All rights reserved.