Uniden DSS 7805WP manual Registering the Handset, Model Directions

Registering the Handset

You must register the handset to the base before you can use it. Only one handset can be registered at a time. (If an accessory handset has previously been registered to a base, you must reset the handset before you can register it to a new base.)

1.Select your base model from this list and follow these directions:

MODEL	DIRECTIONS:
DSS7815	• Make sure there is no handset sitting in the
DSS7815+1	main base charger before starting.
DSS7915+1	• Disconnect the base AC adapter.
	• While holding the [find handset], reconnect
	the AC Adapter.
	• On the handset, press and hold [#] until the
	display reads HANDSET REGISTERING
	and you hear a beep.
DSS7855	• Make sure there is no handset sitting in the
DSS7855+1	main base charger before starting.
DSS7855+2	• Disconnect the base AC adapter.
	• While holding the [flash/find hs], reconnect
	the AC Adapter.
	• On the handset, press and hold [#] until the
	display reads HANDSET REGISTERING
	and you hear a beep.
DSS7960+1	• Make sure there is no handset sitting in the
DSS7955	main base charger before starting.
DSS7955+1	• On the base, press the MENU soft key.
DSS7955+2	• Scroll down to REGISTER HANDSET and
	press the OK soft key.
	• On the handset, press and hold [#] until the
	display reads HANDSET REGISTERING and
	you hear a beep.

5