Uniden DX8200 manual Setting UP Your Phone

SETTING UP YOUR PHONE

2.After the Handset stops beeping, remove it from the base Unit.

3.Wait for 5 seconds, place the Handset back on the Base Unit.

4.The status LED on the Base Unit will flash rapidly to indicate that the Digital Security Code is set to one of the more than 65,000 codes.

NOTE: If the Base Unit loses power while the Handset is off the Base, the Digital Code may be erased. When this happens, the Handset will not function.

To re-establish communication between the

Handset and Base Unit:

1.Restore power to the Base Unit.

2.Place the Handset back on the Base Unit.

3.The status LED on the Base Unit will flash rapidly to indicate that the Digital Security Code is set.

SETTING UP YOUR PHONE

33