1) Installing the Phone
1-1. Choosing the Best Location
To get the best performance out of your new phone, put it in the best location:
Near an AC outlet and a telephone wall jack.
PLACE YOUR BASE
In a
TRY TO AVOID
•Microwave ovens | •Fluorescent | •Other cordless | |
•Refrigerators | lighting | telephones | |
| •Personal computers | •Areas with | |
| a lot of | ||
| •Wireless LAN | ||
•TVs | background | ||
equipment | |||
•Other electronics |
| noise | |
| •Dust | •Shock | |
•Direct sunlight | •Excessive | •Vibration | |
moisture |
| ||
•Extreme temperatures |
|
|
Notes: For maximum range
•Keep both the base and handset antennas free of obstruction.
•When the handset is not in use, place the handset in an upright position.
•Metal and reinforced concrete may affect cordless telephone performance.
1-2. Plug in the Battery
Use only the Uniden
1 | Locate the battery packs, battery |
| covers and the handsets. |
2 | Line up the red and black wires |
on the battery pack connector |
with the sticker in the handset's battery compartment.
Red
Black
3 | Place the cover over the |
| battery compartment and |
slide it up into place.
Push the battery connector in firmly. (You should hear it click into place.)
1-3. Plug in the Base and Charging Cradle
You can put the charging cradles for additional handsets anywhere they can get power. They do not have to connect to a phone line.
4 | Put the base's AC adapter cord through the hole in the stand |
and connect the AC adapter to the DC IN 9V jack. |
5
To DC IN 9V
Route the cord through the molded wiring channel.
6 | Connect the AC adapter to a standard 120V AC wall outlet. |
DO NOT use an AC outlet controlled by a wall switch. | |
7 | Connect the charging cradle's AC adapter |
to a standard 120V AC wall outlet. |
To AC outlet
Route the cord 
AC adapter (supplied)
To AC outlet
AC adapter (supplied)
Don’t put any power cord where it people might trip over it or step on it. If a power cord becomes chafed or worn out, it can create a fire or electrical hazard.
