Multi-Handset Features

The features in this section require a minimum of two handsets to operate. To add additional handsets to your system, see "Expanding Your Phone" on page 12.

note

Using DirectLink Mode

In DirectLink Mode, a pair of handsets can function as two-way radios. DirectLink Mode does not interfere with the main base's ability to make or receive telephone calls. You must set both handsets to DirectLink Mode to make a directlink call.

To enter DirectLink mode, Select Direct

Link option in the main menu. And then press the ENTER soft key. DirectLink Mode complete appears in the display.

To make a DirectLink call, press the DirectLink soft key. Select the handset you want to call. To cancel the call, Press end. To answer a DirectLink call, press talk/flash or . Press end when you want to hang up.

&KTGEV.KPM

5'.'%6

•If the party is out of

range, No Signal

appears in the display, and the operation will be canceled.

•While a pair of handsets are in DirectLink mode, they cannot be used to make or receive calls. Other handsets can still make and receive calls.

To exit DirectLink mode and be able to receive normal phone calls again, press the CANCEL soft key, and then press the OK soft key.

[ 7 7 ] Multi-Handset Features

w w w . u n i d e n . c o m

Page 78
Image 78
Uniden ELBT 585 owner manual Multi-Handset Features, Using DirectLink Mode