Symptom | Suggestion | |
|
| |
| • The call was placed through a switchboard. | |
The Caller ID does not display. | • Call your local telephone company to verify your Caller ID service is current. There may be a problem | |
| with your Caller ID service. | |
|
| |
You cannot register the | • Charge the battery pack in the handset for 10 hours. | |
handset at the base. | • Change the Digital Security Code (see page 15). | |
|
| |
The handset doesn't | • Change the Digital Security Code (see page 15). | |
communicate with other | ||
• Make sure that you have registered all handsets. | ||
handsets. | ||
| ||
|
| |
An extra handset can't join the | • Make sure there are not 2 handsets already using the conference feature. | |
conversation. | • Make sure that another handset is not in privacy mode. | |
|
| |
Room Monitor feature does not | • Make sure to place the handset(s) within the range of the base. | |
work. | • Make sure that Room Monitor is set to On. | |
|
| |
| • Make sure the base unit is plugged in. | |
The answering machine does | • Make sure that the answering machine is turned on. | |
not work. | • Make sure that the message record time is not set to Announce only | |
| (see page 67). | |
|
| |
Messages are incomplete. | • The incoming messages may be too long. Remind callers to leave a brief message. | |
• The memory maybe full. Delete some or all of the saved message. | ||
| ||
|
| |
No sound on the base unit or |
| |
handset speaker during call | • Adjust the speaker volume on the base unit or handset. | |
monitoring or message | • Make sure the call screen feature is set to on. | |
playback. |
| |
|
|
w w w . u n i d e n . c o m | Troubleshooting [ 8 4 ] |
Troubleshooting
