Adjusting the Handset Ringer and Earpiece Volume
[ 14 ] BASICS

RRiinnggeerr ttoonnee aanndd vvoolluummee

When the phone is in standby mode, pressing the
vvoolluummee
key on the handset selects
the handset ringer volume and tone. There are two ringer tones each with two volume
levels. Continue pressing the
vvoolluummee
key to listen to all tones and volume levels. The
phone keeps the last ringer tone and volume setting selected.

EEaarrppiieeccee vvoolluummee

The handset earpiece volume settings (Low, Medium and High) can only be adjusted
during a call. Press
vvoolluummee
repeatedly to select Low, Medium, or High. When you hang
up, the phone keeps the last volume setting selected.
Adjusting the Base Ringer

BBaassee uunniitt rriinnggeerrsseelleeccttiioonnss

There are three ringer selections; High, Low and Off. Select a ringer tone by using the
mmeennuu
key on the base unit. (See "Setting the Base Ringer Volume", page 25).
Terminology
Throughout this manual, terms such as Standby and Talk Mode are used. Below is the
terminology explanation.
SSttaannddbbyy MMooddee- The handset is not in use, off the base, and
ttaallkk
has not been
pressed. A dial tone is not present.
TTaallkk MMooddee- The handset is of f the base and
ttaallkk
has been pressed enabling a
dial tone.