[ 7 ]
GETTING STARTED
GETTING STARTED
BB.. IInnssttaallll tthhee bbaatttteerryy ppaacckk
CChhaarrggee tthhee bbaatttteerryy ppaacckk ffoorr aatt lleeaasstt 1122--1155 hhoouurrss bbeeffoorree
pplluuggggiinngg tthhee pphhoonnee lliinnee iinnttoo yyoouurr pphhoonnee..
1)Press in on the batter y cover release and slide the cover
down until it comes off.
2)Connect the battery pack connector observing cor rect
polarity (black and red wires) to the jack inside the batter y
compartment.
Do not exert any force on this connection. It could cause
damage to the battery or handset. The plastic connector
will fit together only one way. Once you a re certain that
you have made a good connection, then insert the battery
pack into the battery compar tment. Do not pinch the wires.
3)Securely close the battery compa rtment cover by sliding it
up until it snaps into place.
4)Place the handset on the base.
Use only the Uniden
battery (BT-905)
supplied with your
phone. Replacement
batteries are also
available through the
Uniden Parts
Department
(see page 5).