[ 34 ] ADDITIONAL INFORMATION
The digital security code is an identification code used to connect the handset and
the base unit. Normally, setting the code is not necessary.
The first time y ou charge your handset, the security code is automatically set. (See
"About the digital security code", page 4.)
In the rare situation that you suspect another cordless t elephone is using the same
security code, you can change the code.
1)Remove the handset from the base unit. Press and hold
ppaaggee
on the base.
2)The handset is emitting the paging sound. While holding
ppaaggee
for at least 3
seconds, place the handset on the base unit. The paging sound stops.
Leave the handset on the base for more than 5 seconds or until the
ssttaattuuss
LED
stops flashing. A new random security code is set.
Changing the Digital Security CodeIf the handset battery
pack is completely
discharged or the battery
pack is removed, the
digital security code will
be lost. If this happens,
a new security code is set
automatically next time
the battery pack is
charged.