THE INTEGRATED ANSWERING DEVICE[ 40 ]
Setting the TimeThe clock on the EXAI2248 series answering system starts when power is supplied
to the base. Follow these steps to set the clock to the correct time.
set/ringer menu
ans on/off find hs volume
greeting memo
skip/ffrepeat/rew
delete play/
stop
status
1)Press menu.
The system announces “Time” and the current time. The
message counter displays the current numbers ([ ]
through [ ]) indicating the day of the week.
2)Press skip/ff or repeat/rew until the correct day is
announced. The numbers [ ] through [ ] are
displayed on the base.
3)Press set/ringer to select the day.
4)Press skip/ff or repeat/rew until you hear the correct
hour setting. The numbers [ ] through [ ] are
displayed on the base as each hour is announced.
5)Press set/ringer to select the hour.
6)Press skip/ff or repeat/rew until you hear the correct
minute setting. The numbers [ ] through [ ] are
displayed on the base as each minute is announced.
• Normally the idle
time for the menu
mode is 30 seconds
before the system
returns to standby.
However for setting
the time, the idle
time is extended to
two minutes.
• Press and hold
skip/ff or
repeat/rewto
quickly scroll
through the numbers
on the display.
EXAI2248 2/8/2 7:05 PM Page 40