Low Battery Alert

When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, ¨Low Battery¨ appears on the LCD and none of the keys will operate.

If the phone is in use, ¨Low Battery¨ flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.

• Even when the

battery pack is

not being used,

it will gradually

GETTING STARTED

The last number dialed in the redial memory, the names and the numbers stored in the memory locations are retained for up to 30 minutes while you replace the battery pack.

Cleaning the Battery Charging Contacts

To maintain a good charge, it is important to clean the battery contacts on the handset and base unit with a dry cloth or a pencil eraser about once month. Do not use any liquids or solvents.

C. Connect the base unit

1)Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

contacts

discharge over

a long period

of time. For

optimum

performance,

be sure to

return the

handset to the

base unit after

a telephone

call.

• If you must

replace the

battery pack

during a

telephone call,

complete the

replacement of

the battery

pack within

30 seconds,

and you can

return to the

original call.

G E T T I N G S TA R T E D [ 7 ]

Page 9
Image 9
Uniden EXI2965, EXI2960 manual Low Battery Alert, Cleaning the Battery Charging Contacts, Connect the base unit