Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key strokes. Your EXI2960/EXI2965 stores up to 10 names/numbers in handset.
BASICS
1)Press and hold m until ¨Memory Store¨ is displayed.
2)Press ▲ and ▼ or enter a number (0 - 9) to select the memory location where you would like to store the number.
3)Press select. The following screen appears and a cursor flashes indicating that the display is ready for the name to be entered.
If this screen appears, the selected memory location is already stored. Then you must either change the entry in this location, clear the entry in this location, or select ¨Go Back¨ to choose another location.
Memory Store
1
2
Store Name
Edit Memory 1
Delete Memory 1
Go Back
• In memory |
dialing |
operation, you |
must press a |
key within 20 |
seconds or the |
phone will |
return |
to standby. |
If you return |
the handset to |
4)To enter a name (up to 14 characters), use the number keys.
•See the “Steps for entering names and special characters”. (See page 18)
the base, the |
phone will |
• Use # 
and */tone 
to move the cursor to the desired location.
• Use delete to delete characters as needed.
•Press and hold delete to delete all the characters.
•If a name is not required, go to step 5.
Store Number
return to |
standby also. |
• You have 20 |
seconds after |
pressing m to |
5)Press select. ¨Store Number¨ is displayed. The cursor flashes indicating that the display is ready for the number to be entered.
6)Use the number keys to enter the phone number. The phone number cannot exceed 20 digits. Use redial/p to enter pause in the dialing sequence.
The display shows a ¨P¨. Each pause counts as one digit and represents a two second delay of time between the digits as they are sent.
Use delete to delete digits as needed.
7)Press select. The handset beeps and displays the confirmation screen. Memory storage is complete. For example, if you store a name and number into memory location number 7, the display shows ¨Memory 7 Stored¨. If you store the number into memory location number 8, the display shows ¨Memory 8¨. After about 2 seconds, ¨Memory Store¨ is displayed. Repeat steps 2 - 7 to store more numbers.
enter the |
number you |
wish to store. |
Otherwise, an |
error tone will |
sound. |
BASICS
MEMORY DIALING
8)Press m to return to standby mode. | M E M O RY D I A L I N G [ 17 ] |
