Make sure your battery pack is fully charged before choosing the dialing mode.
1) When the phone is in standby mode, press and hold call id/menu. The Caller ID setting screen appears.
2) Press vol/ 
/ 
twice to select ¨Area Code¨.
3) Press select.
4) Use the number keys (0 - 9), or delete/channel to enter the
5)Press select. A confirmation tone sounds and the displayed area code is entered.
6)Press end or return the handset to the base unit to complete the setting. The handset returns to standby mode.
When the area code has already been stored in memory, the stored area code will be displayed. To change it, use the delete/channel and number keys to enter the new area code. Then press select. A confirmation tone sounds. To complete the setting, press end or return the handset to the base unit.
Choosing the dialing mode
Most phone systems use tone dialing which sends DTMF tones through the phone lines. However, some phone systems (such as those in rural areas) still use pulse dialing. The default setting is tone dialing. Depending on your dialing system, set the mode as follows:
[ 16 ] G E T T I N G S TA R T E D | www.uniden.com |
