1) When the phone is in standby mode, press and hold call id/menu. The following screen appears.
2) Press vol/ 
/ 
three times to select ¨Dial¨.
3) Press select to toggle between ¨Tone¨ and ¨Pulse¨ for each setting.
4)Press end or return the handset to the base unit to complete the setting. The handset returns to standby mode.
•If you are not sure of your dialing system, set for tone dialing and make a trial call. If the call connects, leave the setting as is. Otherwise, set for pulse dialing.
•If your phone system requires pulse dialing and you need to send the DTMF tones for certain situations during a call, you may "Switch Over" to tone dialing. (Refer to "Tone Dialing Switch Over" on page 20.)
Setting the language
1) When the phone is in standby mode, Press and hold call id/menu. The following screen appears.
2) Press vol/ 
/ 
four times to select ¨Language¨.
3) Press select to toggle ¨Eng¨ (English), ¨Fr.¨ (French) or ¨Esp¨ (Spanish) for each setting.
4)Press end or return the handset to the base unit to complete the setting. The handset returns to standby mode.
There are three languages to choose from; English, French and Spanish.
GETTING STARTED
www.uniden.com | G E T T I N G S TA R T E D [ 17 ] |
