Connect the base unit | Uniden EXI 5160 specification

Use only the supplied AD-314 AC adapter. Do not use any other AC adapter.

Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

C. Connect the base unit

Route the cord.

1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

2) Set the base on a desk or tabletop, and place the handset on the base unit.

3) Make sure that the charge/in use LED illuminates.

If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.

•Connect the AC adapter to a continuous power supply.

•Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

•After installing the battery pack in the handset, charge your handset at least 15-20 hours before plugging into the phone line. Once the handset battery pack is fully charged, connect the telephone line cord to the base and telephone wall outlet.

4) Connect the telephone line cord to the TEL LINE jack and to a telephone outlet once the handset is fully charged.

If your telephone outlet isn't modular, contact your telephone company

for assistance.

Modular

[ 12 ] G E T T I N G S TA R T E D

www.uniden.com

Image 12

Uniden EXI 5160 manual Connect the base unit

Contents

Page Page Quick Contents Welcome Features Controls and Functions N T R O L S a N D F U N C T I O N S Setting up the Phone Choose the best locationDo the following steps Install the rechargeable battery pack into the handset Getting Started E T T I N G S TA R T E D Low battery alert Cleaning the charging contacts Connect the base unit Mounting the Base Unit on a Wall Standard wall plate mounting Direct wall mounting Setting Menu Options Choosing the dialing mode Setting the language Making and Receiving Calls Handset On Base Handset Off Base Adjusting the Handset Ringer and Earpiece Volume Handset ringer tone and volumeEarpiece volume Temporarily Mute Ringer Tone Dialing Switch-over If you need to enter tone dialing digits, you can switchRedial Traveling Out-of-Range Selecting a Different Channel Flash and Call Waiting Hints Voice Mail Waiting Indicator Storing Phone Numbers and Names Press memory or select E M O R Y D I a L I N G Steps for Entering Names and Special Characters If you make a mistake while entering a name Memory dialing from Standby Mode Making Calls with Memory Dialing Memory dialing from Talk Mode Chain Dialing Editing a Stored Name and/or Phone Number Replace Memory? Yes Memory01 Stored Movies Erasing a Stored Name and Phone Number Press select or delete/channel RocketDial Storing and Editing the RocketDialMaking Calls with the RocketDial Deleting the RocketDial When the Telephone Rings Caller ID and Call Waiting Caller ID Viewing the Caller ID Message List Press call id/menu When the pointer is at ¨Yes¨ When the pointer is at ¨No¨Deleting Information from the Caller ID List Deleting a Caller ID message Tone sounds and all stored Caller ID messages are deleted Using the Caller ID List Long Distance calls and Area Code Setting/CancellationCalling a party from the Caller ID list Storing Caller ID messages in Memory dialing Installing the Beltclip Headset InstallationChanging the Digital Security Code To attach the beltclip Maintenance Battery replacement and handlingPower Failure Troubleshooting Symptom Suggestion Charge/in use LED Symptom Suggestion Liquid Damage Case Action Battery Information General InformationAC Adapter Information Frequency Precautions Installation Considerations Terminal Equipment Radio Equipment Index K, L Memo Memo At Uniden, we´ll take care of you