NOTE
Whenever you are using a menu screen, you must press a key within 20 seconds or the phone will return to standby. You may also press mem to exit a memory menu at any time.
NOTE
If you select Go Back
at any time, no changes are made and the handset shows the Memory
Store screen.
EDITING A PHONE NUMBER IN MEMORY
Follow these steps to edit a phone number that you have already programmed into memory.
1) Remove the handset from the base.
2) Press and hold mem for two seconds. The display shows the Memory Store screen and any saved numbers.
3)Use the : and ; keys or number keypad to select the memory location you would like to edit. The < and > keys toggle between the names display and the numbers display.
4) Press select. The following screen appears with the memory location number that you have selected in the display
| You may move the > cursor down to Go Back and |
NOTE | press select if you would like to exit this menu. |
|
|
5) With > cursor next to Edit Memory, press select. The following screen appears, and a cursor flashes indicating that the display is ready for the name to be edited.
6)Use the : and ;keys to scroll through the character menu. Use the
<and >keys to move the cursor to the desired location, and enter the name.
7) Press select. The following screen appears, and a cursor flashes indicating that the display is ready for the number to be edited.
8) Enter the phone number with the number keypad.
17
