Manuals / Uniden / Communications / Cordless Telephone

Uniden EXI 6960 manual Setting the PULSE/TONE Switch, Handset Ringer Tone and Volume

Models: EXI 6960

1 34

Download 34 pages 59.53 Kb

Page 16

Ring Type B

High

TIP

Most phone systems use tone dialing. Check with your local phone company if you’re not sure whether your system is tone or pulse.

SETTING THE PULSE/TONE SWITCH

Be sure the PULSE/TONE switch is in the TONE position unless your local phone system uses pulse dialing.

ADJUSTING THE RINGER AND VOLUME CONTROLS

▼Handset Ringer Tone and Volume

Your EXI 6960 lets you choose from two ringer tones, Type A and Type B. Each tone has a low and high volume setting. When the phone is in standby

mode, press the vol ▲ or ▼ key on the handset to select the handset ringer tone and volume. As you change the settings, the selection appears on the LCD.

▼Handset Earpiece Volume

The EXI 6960 comes with four volume settings for the handset earpiece - normal, medium, high and loud.

NOTE

You can only adjust the earpiece volume setting during a call.

During a call, press vol ▲ to increase the earpiece volume, press vol ▼ to decrease the earpiece volume. As you increase or decrease the volume, your selection appears on the LCD.

Talk 0:15 <High>

When you hang up, the EXI 6960 keeps the last volume setting selected.

13

Image 16

Uniden EXI 6960 manual Setting the PULSE/TONE Switch, Handset Ringer Tone and Volume, Handset Earpiece Volume

Contents

MHz Cordless Phone with Caller ID Thank At Uniden, we’ll take care of you Contents Welcome FeaturesMHz Technology Call Waiting Caller ID Line Backlit Display Handset Base AC Adapter Rechargeable Battery Included in Your PackageDESK/TABLETOP Installation Plug the other end of the longSetting the Handset Retainer for Wall Mounting Wall InstallationRaise the antenna to a vertical position Standard Wall Plate Mounting Raise the antenna on the base Direct Wall Mounting Page Raise the antenna on the base Installing the Handset Battery Pack Slide the battery cover on until it snaps into placeCharging the Battery Pack Cleaning the Battery ContactsInitial battery charging Low battery indicatorHandset Ringer Tone and Volume Setting the PULSE/TONE SwitchHandset Earpiece Volume Using the page Feature Automatic Digital Code SecurityFollowing screen appears Once you have found the handset, press any key to endMaking and Receiving Calls Flash and Call WaitingStoring a Phone Number in Memory A cursor flashes indicating thatUse the and keys to scroll through the character menu. Use Appears, and a cursor flashes indicatingEditing a Phone Number in Memory Press select if you would like to exit this menuUse the key to move the cursor to the Yes command Erasing a Number from MemoryPress select. The following confirmation Screen appearsUsing Memory Dialing Chain DialingSetting Up Caller ID Options Using Caller IDMore effectively Using Cidcw Caller ID on Call Waiting During a call when you hearScreening Your Calls Then the name does not appear on the second lineCalling a Caller ID Number Reviewing Caller ID NumbersPress talk and the number automatically dials Storing a Caller ID Number Into a Memory Location Deleting a Caller ID NumberDeleting All Caller ID Numbers Press delete, and the following screen appearsUsing Redial Using the Tone FeatureSelecting a Different Channel Phone changes to a different channelTraveling OUT-OF-RANGE Quick Reference Chart May be weak. Charge the battery On the base unit for 15-20 hoursFrom the base unit Place the base unit away fromTalk mode Hours Standby mode Days N E R a LS E N D S E TPage Functionsand Ontrols