Uniden EXP2905 manual Receiving calls through the speakerphone

Receiving calls

1 When you hear the phone ring;

• Press TALK

TALK/BATT

LOW LED

VOL	FLASH
switch
HOLD
	CHANNEL
*TONE

Additional tasks

(or any key except OFF ).

or

•Pick up the handset from the base phone when the handset is placed on the base phone.

The TALK/BATT LOW LED on the handset and the LINE LED on the base phone light up.

2When you’re done talking, press OFF or replace the handset on

the base phone.

The TALK/BATT LOW LED on the handset and the LINE LED on the base phone go off.

Basics

To	Do this
Put a call on hold	Press	HOLD .
	The TALK/BATT LOW LED flashes slowly.
	Press	TALK to resume the conversation.
Select a better channel	Press	CHANNEL .

Adjust the handset volume Set the VOL switch to H (high), M (middle) or L (low).

Switch to tone dialing	Press	*TONE	while using the telephone after you’re connected.
temporarily	The line remains in tone dialing until disconnected.
Switch to another call	Press	FLASH	to access the flash function.
(“call waiting” service*)	Press	FLASH	again to return to the first caller.
Turn on/off the ringer	See “Setting the ringer type” on page 23.
of the handset

* You need to subscribe to the service from your telephone company.

Receiving calls through the speakerphone

When the phone rings, press
SPEAKER	on the base phone.	*TONE
The SPEAKER LED and the
		LINE LED
LINE LED light up.
“- -” appears on the display.
To adjust the speaker volume,
press VOL	or VOL .
When you are done talking, press		HOLD
SPEAKER	again.
To obtain the best speakerphone		SPEAKER
performance, see page 18.
		LED

To adjust the ringer volume, see page 24.

FLASH

VOLUME control

SPEAKER

Basics

19