Uniden EXP2905 manual Making calls through the speakerphone

If the handset battery becomes weak during a call

You hear a beep every three seconds and the TALK/BATT LOW LED on the handset flashes.

The call will disconnect soon. Replace the handset on the base phone to charge.

For optimum performance, charge the battery for 15-20 hours. Note that during the first 10 - 15 minutes of charging, the phone will be inactive, i.e., unable to make or receive a call.

After this initial 10 - 15 minutes, you may be able to use the phone, but the battery duration will be very short; thus it is recommended that you fully charge the battery before the next usage.

Making calls through the speakerphone

Basics

Press SPEAKER on the base phone. The SPEAKER LED and the

LINE LED light up. Dial the phone number.

When you are done talking, press SPEAKER again.

REDIAL/P

*TONE

LINE LED

HOLD

SPEAKER

LEDSPEAKER

FLASH

VOLUME control

Additional tasks

To	Do this
Put a call on hold	Press	HOLD .
	The LINE LED flashes slowly.
	Press	SPEAKER to resume the conversation.
Adjust the speaker volume	Press	VOL	or VOL .
Switch to tone dialing	Press	*TONE while using the telephone after
temporarily	you’re connected.
	The line remains in tone dialing until disconnected.
Switch to another call	Press	FLASH to access the flash function.
(“call waiting” service*)	Press	FLASH again to return to the first caller.

* You need to subscribe to the service from your telephone company.

continued

Basics

17