EXP93 Charging Cradle
The extra charging cradle is not a replacement for the base. Put it in a different room than the base so you can recharge the phone on the cradle.
Example: You want to use your cordless phone in the kitchen (an area of high interference). Connect the base in a room with low interference (without appliances, televisions or computers); then, put the charging cradle in the kitchen.
1. Plug the charging cradle AC adapter connector into the DC input jack on the back of the charging cradle.
2. Wrap the AC adapter cord around the strain relief. Set the cradle on a flat surface.
Use only the AC adapter that came with the charging cradle.
3.Plug the AC adapter into a standard 120V AC wall outlet that is not controlled by a wall switch.
4.Place the handset upright in the charging cradle as shown to the right.
The charge LED lights while the unit is charging.
Back of the Handset
| The charging cradle does not reset the digital |
NOTE | security code (refer to page 2.) |
|
|
8
