Connect the base unit
If you want to install the base unit on the wall, see page 7.
Place the power cord so it does not create a trip hazard, or where it could become chafed and create a fire or electrical hazard.
3
To AC outlet
To DC IN 10V
AC adapter
2 (supplied) To telephone outlet
Telephone line cord (supplied)
To TEL LINE
1 Snap the desktop/wall mount adapter into the top of the base as shown.
Route the
AC adapter cord
2 Connect the telephone line cord to the TEL LINE jack and to a telephone outlet.
3 Connect the AC adapter to the DC IN 10V jack and to a standard 120V AC wall outlet.
4 Set the base unit on a desk or tabletop and place the handset on the base unit.
Then raise the antenna to a vertical position.
5
