CHARGING THE BATTERY PACK▼Initial battery charging
Before plugging the phone line into your new phone for the first time,
fully charge the rechargeable battery pack for 15-20 hours
without interruption.
1) Place the handset on the base.
2) Make sure that
status
LED lights. If the LED doesn’t light, check to see
that the AC adapter is plugged in and that the handset makes good
contact with the base charging contacts.
▼Charging optional battery packs
The base unit of your phone is equipped with a compartment for
charging an extra battery pack for use in your handset. Youcan
obtainan extra battery pack from your authorized Uniden dealer.
1) Position the battery pack so the inner side with contacts is facing up.
2) Slide the battery pack into the
charging compartment until it
clicks into place. The compartment
has a latch that keeps the battery
in place.
3) Fully charge the battery for 15-20 hours. When charging is complete,
pull up on the latch to remove the battery pack. To install the charged
battery into the handset, refer to "Installing the Handset Battery Pack,"
page 9.
10
In the event of a power failure, your spare battery pack
can be used as a back-up power supply for the base unit.
Pleasevisit your
authorizedUniden dealer
toobtain an extra battery
packor contact the Uniden
partsdepartment at
(800)554-3988.Hours are
from8:00 a.m. to 5:00 p.m.
CentralTime, Monday
throughFriday.
C:\Manuals 7\Exs9110\EXS9110.vp
Wed Sep 30 14:48:16 1998
Color profile: Disabled
Composite Default screen