CHAIN DIALING
On certain occasions after dialing a number, you may be requested to
enter an access code, such as your account number. You can enter this
number into a memory location for later use by doing the following.
1) Store the access code into one of the memory locations
(01-20) or press memory key
a
,
b
,
c
or
d
following steps 1-5 above.
2) Dial the party or service main number.
3) When you need to enter the special number, press
mem
followed by
the memory location (01-20) or press memory key
a
,
b
,
c
or
d.
MUTE
To use the mute feature during a conversation, press
mute
. The other
party will not be able to hear you although you can hear them. To
disable the mute feature, press
mute
again.
TRAVELING OUT-OF-RANGE
As you begin to move too far from your base unit, you will first hear a
clicking sound. As you travel further out-of-range, the voice
transmission will begin to break up. If you pass the range limits of the
base unit, your call will terminate.
ERASING A STORED NUMBER FROM MEMORY
1) Remove the handset from the base unit.
2) Press the
mem
button twice.
3) Press the memory location (01-20) or press
memory key
a
,
b
,
c
,or
d
to be erased. A
tone indicates that the stored number
is erased from memory.
17

USING YOUR PHONE

NOTE
Anerror sounds and the
eraseprocedure will be
canceledif more than 30
secondselapse between
eachkeystroke.
C:\Manuals 7\Exs9110\EXS9110.vp
Wed Sep 30 13:53:27 1998
Color profile: Disabled
Composite Default screen