!
DO NOT use an outlet controlled by a wall switch.
!
Before you plug the other end of the telephone cord into the modular jack on the wall, charge the battery (refer to “Charging the Battery Pack,” page 10).
4) Put the AC adapter cord inside the molded wiring channel, then wrap it around the strain relief notch. Plug the AC adapter into a standard
120 VAC wall outlet.
5) Plug one end of the short telephone cord into the TEL LINE jack on the back of the base, then plug the other end into a standard telephone jack.
6)Line up the mounting slots on the base with the mounting posts on the wall, then push in and down until the
phone is firmly seated.
7)On the base unit, pull the handset retainer out of the slot and rotate it clockwise 180 degrees.
I N S T A L L I N G A N D A D J U S T I N G
5
